Nice one get the gopro out

Alex's board? ----- First ones i made and did a set for Davo Average speed 46.23 knots - Max. 2 sec. (software 48.33 knots Hunstanton 08 March 2008

http://www.kiteboarder.co.uk/kitesurfin ... =3&t=58060" onclick="window.open(this.href);return false;
PM ME

Who left a bar and lines at Cleethorpes this weeked
Distinguishing marks colours ect.

Have ago Gaz you have got them I did this a long time ago before my accident .

http://www.kiteforum.com/viewtopic.php?f=196&t=2382190" onclick="window.open(this.href);return false; could be a cheap / easy starting point

https://www.youtube.com/watch?v=pWNvY_8krWg" onclick="window.open(this.href);return false;

http://www.kiteforum.com/viewforum.php?f=196" onclick="window.open(this.href);return false; some more info there is a homemade wood one on the links

2 right TMW We have had Pole dancers and Now Stand up Plonkers Next thing they will be putting Wellington boots on kiteboard O Shit

Will you lot sod off so i can do my own thing

28m Monkey Kite in my garage in red

http://www.kiteforum.com/viewtopic.php?t=2302052" onclick="window.open(this.href);return false;

I can get a raceboard 3 kites 1Twin-T All in my Smart Car O and Me and i have a T4 -But take the Smart if i am going to work

THE PIEMAN IS BACK God help us

Cheap epoxy is not as strong as better quality resin I am talking on a molecular structure of the resin Slow curing free radicals makes a much stronger structure dependent on fibres used, glass /carbon etc. to achieve best results the curing process should be at a constant temperature no less than 1...

Epoxy putty will do put some tape on the good side over the damaged holes Don’t over fill the repair with putty place some clean plastic over the repair and roll it flat (Jam Jar) leave it overnight pull the plastic off it should be nice and flat and may not need sanding drill the holes out (6.2mm) ...